Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They do not decay or rust as aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the frame of the previous one easily. If you have double glazed window repairs-paned windows that are held together by internal beading, it is harder to remove and replace the old panes. In this case it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you plan to try to remove the glass panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall onto the fabric rather than on the floor where they can be trampled on and cause further damage.

After the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and fix the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap between the door and the window is substantial, you may want to use a security screen that also includes an opening. This will provide the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. In time, they could develop a variety of issues such as sagging. A sagging window in uPVC could cause issues with light, draughts and even security. It's important to take action immediately if you realize that your uPVC windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need open the window to access the frame. With the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in place.

If you cannot reposition the hinges, you might have to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to lose tightness. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. Most often, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need close the window and then perform a test to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. Windows that leak water do can not only cause degradation of your home's structure but also hinder your efforts to regulate the temperature inside your home. The most common reason for leaks in upvc window repair windows is that the sealant around the frame has been damaged or missing.

This is an easy fix that can be done by any DIYer who is competent. Depending on how severe the issue is, old caulking might need to be removed. It is important to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

It is important to check that any drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leak originates from the glass in your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens in the breeze. These are easily repaired by any DIYer who is skilled and are usually done within a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier if you have someone to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue can be caused either by opening the window incorrectly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be happy to give you suggestions.

It is also important to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different things. First, the hinges due to wear and tear can become misaligned, this will cause an opening to appear where the sash meets the frame. This can be easily fixed by giving them a thorough clean, however if they are beyond repair it may be necessary to get them re-aligned or replaced. The interlock, which is on the hinge side of the window and can also become misaligned, again it may be possible to give them a thorough clean, however in some cases it might be necessary to get them replaced.

The next most common cause of draughts is the window seals. They can become worn down or damaged over time, and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures, and reduce the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs, your upvc windows will provide excellent insulation and security for your home. It is crucial to realize that windows last for a certain period of time and they may reach the point when it's more economical to replace them than fix them. If you have any problems with your upvc window repairs window, it's best to consult an expert as soon as possible.