Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace and will usually fit into the frames that were previously in use very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you start working on the glass so that any shards will fall on the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional can come out and repair the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the distance between the door and the window is large, you might need to consider a security screen that also includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It is crucial to act as soon as you notice your uPVC windows are sagging.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows to reach the frame. Then, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and test it for fit. If you're satisfied with the fit of the window, tighten the screws to hold them in place.

If you cannot reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. It is essential to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. This is typically caused by screws that have become undone over time, but it can also be caused by the handle mechanism wears out. Luckily, it's not difficult to repair a loose Upvc window repair window handle yourself. First, you'll need to shut the window and perform an initial fitting. The corner joints of the sash need to be aligned with the casing joint. If it does not you can use a screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is essential to take action if get up each morning to find a smoky wall and floors that are wet. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the problem the old caulking may require removal before a new layer of caulk can be applied. It is essential to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes are free of debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more serious situations, you may need to think about replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the home.

It is also important to remember that if the leakage is coming from between the glass of your double glazed window repairs near me-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be corrected by an upvc window repair near me window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it opens in the breeze. They can be replaced by any competent DIYer and can be completed in just a few minutes.

Like any mechanical part, hinges can be damaged over time. The process of replacing a hinge on a window is an easy process, but it's simpler if you have someone to help hold the frame up.

Verify that the uPVC hinges are closed and open in the correct direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or by improper installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to give assistance.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also be disaligned as a result of wear, creating gaps where the sash meets frame. These can be easily repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to get them aligned or replaced. The interlock may also become misaligned. This happens on the hinge's side, and could require to be cleaned. In some cases it is possible to replace these.

The second most frequent reason for draughts is window seals. They can become worn down or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They can help keep cold air out and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it could be more cost-effective to simply replace them instead of fixing them. If you are having issues with your upvc window repair windows, it is always recommended to seek help from a professional immediately.