Double Glazing Window Repair

Over time, double glazing can create problems, such as being difficult to open windows or a door that is snagged. Fortunately, these issues can be resolved easily.

Many homeowners will attempt to solve these issues on their own, however, this should be left to experts. It's risky to fix these issues without the proper tools and information.

Broken Panes

A damaged or broken window can be a stressful and inconvenient issue. It could let hot or cold air into your home, and leave a gap that lets in moisture or debris. It also reduces your energy efficiency, as your AC and furnace will have to perform more to keep your home warm. Depending on the weather conditions and whether you have single or double-pane windows, you may be able to temporarily fix the damage using silicone sealant. However the final solution will require expert assistance.

A cracked window can be fixed using heavy-duty tape. A piece of tape could be placed over the crack to stop it from getting any worse. A crack that is large enough to penetrate the glass, or is too large to be covered by tape will need to be replaced completely.

The excitement of a pet when you open the door could cause broken glass. The frames of your windows can shift over time and break the packaging material that holds the glass sheets.

Wear thick work gloves in the event of a broken pane of glass. Put a cardboard container close to the pane in order to catch any fragments. Take the sash off and work on a level surface, like tables. Wear a mask to prevent breathing in the glass fragments.

After removing the old glass, remove any varnish and paint from the window frame. You can use a heat gun to soften the old glazing putty or metal glazing points that helped to hold the glass in place.

Then, you can take measurements of the opening to make the new pane. To allow for expansion and contracting it is recommended to purchase the replacement glass slightly smaller than the opening. Visit your local hardware store or home center cut the glass to these measurements.

Place the glass into the frame. If there are any gaps, you can fill them with silicone caulk which is available from a home improvement store. Smooth the caulk with a putty knife. Add glazier's points to the corners and frames of the glass about every six inches to ensure that the pane is securely held in place.

Condensation

Condensation can happen on double-glazed windows, whether they are old or new. This is especially true in winter, when colder air collides with warm glass. It could be a problem but it is not usually an problem. This is because condensation on windows actually indicates that your double-glazed is working correctly.

It can be an indication that your seal is failing and moisture is entering the gap. There may be an appearance of milky water on the window or beads appearing across its surface. This must be addressed to stop mold, mildew or any further damage.

Fortunately condensation can be eliminated quite easily. A technician will drill a small number of holes into the window frame, which allows the moisture that has been trapped to escape. This process is known as defogging. It can be used to get rid of staining caused by trapped moisture.

Defogging does not fix the root issue of a faulty window seal. In fact, it might not even when the condensation has gone, as the compromised air that was between the panes is still there. This could mean that you're not getting as much heat insulation as you would like from your windows.

It is important to speak with an expert as soon you detect moisture in your windows to determine the next steps. They might be able recommend a solution, such as adding vents in the windows to let fresh air in, but not allowing warm air to escape.

It's the last thing you'll need for your double-glazing to break down. This is especially true when it can be costly to replace. With the right equipment, skills and knowledge, you are able to repair your double glazing and keep it in good working order for a long time. Contact us today if you need double glazing repairs. We provide a variety of services from replacing one or more panes of glass that has been tempered to installing energy efficient upgrades.

Leaks

Leaks can cause damage and are expensive to fix. It can be costly to fix, and is often an indication that your home has other problems such as dry rot or mould. This is why it's essential to address a leak as soon as possible.

If you notice that your double-glazed windows have a draught it's likely that the seal has been damaged. This could also mean that there is no gas argon between the panes of glass which is used to create insulation. This issue can be solved by a specialist technician who will reseal the window.

Double-glazed windows can turn cloudy or misty because of dirt. This is usually a sign that the sealing is failing and the glass should be cleaned. This can be done by a specialist using high pressure water jets which will quickly clean the glass of any dirt or debris.

If condensation develops between the two panes of your double glazing, it is an indication that the seal is leaking and that there is not any argon remaining between the glass. This is a serious problem and means that your double glazing is no longer effectively insulating your home, as it should do. The glass unit can be replaced, but you'll need to do it sooner rather than later due to the performance of the double-glazed window has been impacted.

If you own double-glazed windows covered by warranty, you should call the installer and report any problems with the units or seal of the glass. It is highly unlikely that the warranty will cover these issues. If you attempt to play with the units or try to fix them yourself, this could invalidate the warranty, and you should always leave these repairs to the professionals. We recommend that you hire a double glazing repair specialist.

Weather Damage

In areas of extreme weather, double-glazed windows require a sturdy frame that can hold the glass panes in place. Ice, snow high winds, and tumultuous thunderstorms can all result in damage to your windows. Get a professional's help to repair double glazing if you notice cracks, dents, or holes.

If you see water running down the sides of the window repair, it may be an indication that the inner seal has been damaged and is allowing water into your home. Your uPVC window frame or aluminum window repair frames may also be bent or warped. To fix this, you will have to replace the window repair seal, and then insert it into the frame.

window repair seals ensure that double-glazed windows are airtight. They stop heat escaping from your home and prevent condensation between the glass panes. The window seals, which keep the glass in place are made of uPVC or aluminum. If the window seals break down, you can encounter issues such as the loss of energy, draughts or windows that have mist.

Misting windows are a typical issue and are due to the insulating gas inside the double glazed window repairs-glazed window deteriorating. The argon gas keeps the glass in place and forms an airtight seal, but when the seal is damaged or worn, it can let the gases escape. The escaped argon gases can lead to condensation between the glass panes.

This issue can be resolved by replacing the window seal, then re-inserting the glass and applying an anti-fogging agent to prevent condensation from occurring in the future. The best way to do this is to contact an expert to complete the job for you.

Double-glazed windows are essential however they can also be damaged and need to be repaired. Fortunately, most windows can be restored without the necessity of replacement. It is best to have some basic tools in your arsenal. You'll need gloves to protect yourself, a tape measure, scotch tape or transparent film, nail polish, and a plastic sheet which can be cut to size.